At about $1500 real tilt-shift lenses are not cheap. (Long time readers will appreciate the correct spelling :). Instructable user Cpt.Insano created a 3D printed adapter that converts practically and Nikon lens into a tilt shift lens. Sadly, getting the lens further from its flange distance means that the lens will only operate in Macro mode, but I would assume that getting a Nikon lens onto a Canon body may work as Nikon has longer focal flange distance than Canon.
Photographers and Videographers are a creative group of people. We use our creativity to make beautiful images and sometimes extend that creativity into creating the tools to capture those images. This website is a testament to that creativity.
The future is now. One of the most powerful tools that is now accessible to the DIY photographer is 3D printing. If you can imagine it, you can make it real. I recently started dabbling in 3D printing and wanted to share some things I learned that might make your journey into 3D printing a little smoother.[Read More…]
with the slow decay of film it is getting harder and harder to find film to use on old (or new) cameras that use 120 film. Even you do find 120 film (hint Amazon, eBay) it is not trivial to develop (not to mention expensive). But what if you have a Diana or a treasured Mamiya that you want to use? You can still use them with 35mm film if you can manage to load the film into the spool in a way that you can wind it after each shot.
The photos you take will not be restricted to the 35mm frame that you are accustomed to, but go all over the sprockets. It’s a pretty cool effect if you ask me.
Here are three ways with ranging budgets, innovation levels and description to use 35mm film on 120 cameras:[Read More…]
If you are looking into a well built Time lapse motion controller, you may have noticed how expensive these things are. An eMotimo TB3 for example (review | buy) will set you back about a grand and a Syrp Genie is not far behind (unboxing | buy). And none will provide full 3 axis motion control. So of course a possible solution would be to build a time lapse motion controller yourself. It is not an easy task, and gladly, Doug Urquhart over at Instructables is giving a pretty comprehensive tutorial.
About two years ago the web was sweat with the latest panoramic trend – small planet panoramas (AKA spherical panorama). It was only a matter of time until someone got the clevers to elevate this into the next stage: Small Planet Time Lapse Video.
Photographer Jonas Ginter used a 3d printed a 3d device that allows him to capture photos from 6 different GoPros simultaneously and then combined the footage in post to create a movie of the same effect:[Read More…]
Lux is a work of beauty. This velvet looking camera is a has a waist level viewfinder and it shoots 120 film. Made by Kevin Kadooka it is 100% open source with everything up for improvement and modification, from the 3D printed body, to the electronic shutter (powered by Arduino) ending with the brilliant view finder.
This time he is making a fully open-sourced camera and no need for backing to get one. You can build your own with the electronics and 3d files openly available.
The camera itself is beautiful black with a brilliant viewfinder and a sexy shutter button (that can glow in red light)[Read More…]
3D printing is making huge leaps in the last few years. The idea of 3D printing has changed and evolved from being a (relatively) rapid prototyping tool to being a small home fabrication unit.
Operating a 3D printed is easier now than ever, materials are cheaper and even the printers themselves are now around the $1,500 mark (Up, Makergear and the good ol’ Replicator are two good examples).
This got me thinking, will we be printing our own camera and camera accessories in the near future?[Read More…]