ToupTek Atlas SH20: A 5.1kg Harmonic Mount With a 30kg Payload
Nov 20, 2026
Share:
Carrying a large telescope to a dark-sky location means bringing a heavy equatorial mount along. That can become a problem for astrophotographers who travel frequently. ToupTek Astro wants to make that a little bit easier with its new Atlas SH20 harmonic equatorial mount.
The mount weighs 5.1kg, but it can carry equipment weighing up to 30kg with counterweights. Without them, the rated payload reaches 20kg. The mount comes fitted with brushless servo motors, dual-axis encoders, and an integrated power distribution system. It also supports equatorial and alt-azimuth operation.
5.1kg mount with room for large telescopes
The Atlas SH20 weighs 5.1kg without its tripod and other accessories. For a mount that can carry up to 30kg, that is a relatively compact package. ToupTek specifies a payload of 20kg at a 20cm load position without counterweights. Adding counterweights increases the capacity to 30kg at the same position.
Users can attach a compatible shaft through the standard M12 × 1.75mm connection. ToupTek requires counterweights once the telescope-side payload exceeds 20kg.
The saddle accepts both Vixen and Losmandy dovetails. This covers two common mounting standards among telescope manufacturers. Owners can use compatible telescope plates without replacing them with a proprietary mounting system.
A direct-drive system with brushless motors and encoders
ToupTek uses brushless DC servo motors and 100:1 strain wave reducers to move the SH20’s two axes. The motor drives each reducer directly, so the transmission does not need belts. This removes the need for belt tension adjustments and avoids problems associated with belt ageing.
The mount uses different reducer sizes for its two axes. The right ascension axis has a size-20 strain wave reducer, while the declination axis uses a size-17 unit. The RA axis also includes a mechanical brake. Both axes have 18-bit motor-side absolute magnetic encoders. These encoders provide position feedback to the control system as the mount moves.
SH20 has a periodic error of no more than 30 arcseconds peak-to-peak, with a cycle of 432 seconds. Each unit comes with an individual factory test report. Periodic error describes the repeating tracking deviation introduced by the drive mechanism. It can affect star shapes during long exposures, particularly at longer focal lengths.
The SH20 provides ten selectable slew speeds, ranging from 0.25x to 1440x. Its maximum slew rate reaches 6 degrees per second. Users can choose slow movements for centering an object or faster movements when moving between targets. The three load settings let them adjust the control system for different equipment configurations.
One mount for deep-sky imaging and visual observing
Most equatorial mounts concentrate on following the sky for astronomical observation and imaging. The Atlas SH20 also offers an alt-azimuth mode. Users can switch between EQ and AZ operation through the application or hand controller without restarting the mount.
Equatorial mode will interest deep-sky astrophotographers most. After polar alignment, the mount follows the apparent movement of celestial objects as Earth rotates. This allows cameras to collect longer exposures without field rotation.
Alt-azimuth mode moves the telescope along horizontal and vertical axes. This makes pointing and following objects intuitive for visual observers. It also gives the mount another use for electronically assisted astronomy, quick sky surveys, and planetary imaging.
ToupTek has also provided a latitude adjustment range of 0 to 90 degrees. The mount uses two overlapping scales, covering 0–60 degrees and 30–90 degrees. Its azimuth adjustment range extends to ±6 degrees.
Mount Control
ToupTek developed the mount’s control hardware, firmware, drivers, and applications in-house. Users can operate it through native applications for Windows, Android, and iOS. The SH20 also supports ASCOM and INDI, which allow astronomy software to communicate with compatible equipment. ToupTek includes support for its StellaVita imaging system as well.
For connectivity, you can choose USB-C, 2.4GHz Wi-Fi, or Bluetooth 5. The supplied MHC hand controller provides another way to operate the mount. It has an eight-direction joystick, programmable buttons, and a LOCK switch. A built-in Wi-Fi hotspot adds wireless connectivity, while its coiled cable connects it to the mount.
Price and Availability
The ToupTek Atlas SH20 is priced at $2,499. However, an early-bird offer lowers the price to $2,299. It is available for pre-ordering via ToupTek’s official website. Shipping will begin in late December or early-January 2027.
Clear skies!
Soumyadeep Mukherjee
Soumyadeep Mukherjee is an award-winning astrophotographer from India. He has a doctorate degree in Linguistics. His work extends to the sub-genres of nightscape, deep sky, solar, lunar and optical phenomenon photography. He is also a photography educator and has conducted numerous workshops. His works have appeared in over 40 books & magazines including Astronomy, BBC Sky at Night, Sky & Telescope among others, and in various websites including National Geographic, NASA, Forbes. He was the first Indian to win “Astronomy Photographer of the Year” award in a major category.









































Join the Discussion
DIYP Comment Policy
Be nice, be on-topic, no personal information or flames.