Power your camera for days on a battery that takes seconds to charge

John Aldred

John Aldred is a photographer with over 25 years of experience in the portrait and commercial worlds. He is based in Scotland and has been an early adopter – and occasional beta tester – of almost every digital imaging technology in that time. As well as his creative visual work, John uses 3D printing, electronics and programming to create his own photography and filmmaking tools and consults for a number of brands across the industry.

ucf-battery-tech

Now this is an idea I think we can all get behind. Anything that keeps us charged faster and for longer while out shooting can’t be bad. So, imagine being able to go out and shoot as much as you want for as long as you want without having to worry about your battery life at all. And if it does run out, you can recharge it in just a few seconds.

Such batteries are the vision of scientists at the Univercity of Central Florida, using supercapacitors. Supercapacitors store more energy and can be recharged more than 30,000 times without degrading. Using phones a a comparison, most phone batteries tend to last only around 1,500 charges before severe degradation kicks in. This is why your 3 year old iPhone barely lasts til lunch despite charging overnight.

Utilising nanomaterials, these supercapacitors store a charge using static electricity, rather than the chemical reaction based technology of today’s batteries. They use newly discovered two-dimensional materials only a few atoms thick. Other researchers have tried a similar approach with different materials with very limited success.

If they were to replace the batteries with these supercapacitors, you could charge your mobile phone in a few seconds and you wouldn’t need to charge it again for over a week

– Nitin Choudhary, UCF Postdoctoral Associate

The potential for these batteries isn’t just limited to mobile phones, though. These batteries are flexible, so they hold amazing potential for wearables. You’d never have to worry about your Apple Watch dying in the middle of the day again.

They could also eventually come in standard form factors, such as the AAs we bundle into our speedlights. Even proprietary designs such as camera batteries could also eventually be replaced by something like this. If you’re going away on vacation, shooting video or long timelapses, you may never again need to worry about carrying stacks of spare batteries.

Although the idea has been around for a while, the problem has been interfacing the new technology with existing systems. To overcome this issue, UCF developed a new chemical synthesis approach. This has allowed them to produce supercapacitors composed of millions of nanometer-thick wires coated with shells of two dimensional materials.

For small electronic devices, our materials are surpassing the conventional ones worldwide in terms of energy density, power density and cyclic stability

– Nitin Choudhary

The term “cyclic stability” essentially means how many times it can be charged without degradation. Lithium-ion batteries typically last around 1,500 times at most before you start seeing major degradation and reduced capacity. The new UCF supercapacitors don’t degrade even after being recharged 30,000 times.

They say that the technology is only a proof-of-concept and isn’t ready for commercialisation yet, but it’s an amazing technology that holds great potential for the future.

You can find out more about the technology in this research paper that most us probably won’t be able to understand anyway.

For me, this technology can’t come soon enough. I’m usually out with 2 cameras, which means minimum 4 batteries, usually 8. I also use several USB batteries to power & recharge devices while on location. And if I’m out with a drone, I’ve usually got half a dozen of those with me to give me enough flight time to get all the footage I need.

How about you? Are you ready to ditch your current batteries and embrace this new technology as soon as possible? Tell us what you think in the comments.

[via The Inquirer]


Filed Under:

Tagged With:

Find this interesting? Share it with your friends!

John Aldred

John Aldred

John Aldred is a photographer with over 25 years of experience in the portrait and commercial worlds. He is based in Scotland and has been an early adopter – and occasional beta tester – of almost every digital imaging technology in that time. As well as his creative visual work, John uses 3D printing, electronics and programming to create his own photography and filmmaking tools and consults for a number of brands across the industry.

Join the Discussion

DIYP Comment Policy
Be nice, be on-topic, no personal information or flames.

Leave a Reply

Your email address will not be published. Required fields are marked *

9 responses to “Power your camera for days on a battery that takes seconds to charge”

  1. Dan K Avatar

    I hope somebody makes adapters in Lithium sizes.

  2. Wim van der Geest Avatar

    Nice, but again no diy
    I am a photographer and when I Want to know something about that I will check those pages
    Beginning to really consider leaving this page

    1. Aankhen Avatar
      Aankhen

      If you don’t care about batteries, I have to wonder what sort of photographer you are.

      1. ext237 Avatar

        One with the rocks to use film cameras?

        1. Aankhen Avatar
          Aankhen

          Good point! I hadn’t considered all-mechanical film cameras. I suppose it’s possible to have a battery-free, rocks-powered kit.

          1. ext237 Avatar

            :) There’s a few of us that still have memory cards made of plastic that’s rolled up in little black containers.

    2. John Aldred Avatar

      If you only ever want to see DIY projects, you can always just follow this URL and ignore everything else.

      https://www.diyphotography.net/tag/diy/

    3. Wim van der Geest Avatar

      I already know them! :)

  3. Hannah Rock Avatar
    Hannah Rock

    Soooo… Supercaps again. Charged in seconds. Running your camera for days on them. Wonderful world.

    Might be that the future brings equipment that has just a fraction of today’s energy consumption. Until then, the electrical energy E you can store in a cap is E=1/2CU^2, where C is the capacity and U is the voltage. So you would need quite a high capacity and a high charge voltage. BTDT, electric cars have the same constraints.

    LiPOs, btw, have about 140–260Wh/kg, which means around 15Wh in a Nikon EN-EL3e. This needs to be delivered by a cap as well.

    It gets interesting when you want to “charge in seconds”. The time constant T of a capacitor is T=RC, meaning that it is charged to ~63% after that time, if it has the internal resistance R and capacity C. Since we want “Super”cap(acitie)s, we need low resistances. And as good old Ohm dictates, R=U/I, where I is the (initial) charging current.

    So either be prepared to have high voltages in your device (requirements dictated by MIL-Std 275 B and other norms, e. g. >1mm of clearance between PCB tracks @400V which would be the immediate death of Micro-USB-alike plugs) or FAT CURRENTS (=thick wires) delivered by the charger if you don’t want your cable to go poooof (dissipated power P=UI=RI^2).

    As always: There ain’t no such thang as free beer. If it sounds too good to be true, it most likely is.