Sometimes there is nothing you can do but be amazed by the sharing spirit of people around the web. Following Just Fab recommendation I surfed to check out a lighting site. (Yap, she is the fabulous one who brought you the Ghetto Studio).
After enjoying this great portrait and lighting,
I can see some more added value to this picture and discussion on the “picture flick thread” (click image to go there.
The first cookie is the method used to remove the light fall off – a bounce card under the camera.
A second cookie is fluorescent flicker discussion on the photo page. O’bran was concerned with flickering of the light caused by the way fluorescent works – they flickr many times a second depending on the current fluctuation in your electricity socket.[Read More…]
How to Pack: Chase Jarvis has done it again. In a series called Chase Jarvis Tech, the Seattle based photographer let us in on the ins and outs (literally) of his photography bags. In this video Chase give us the packing angle. (And as always it is fun to see what’s in the pro’s bag. You can start drooling now)
If you are a photographer on the go, always going from one place to another enjoying them fancy airport lounges this is definitely the vid for you (it beats the hell of caring your gear in a gun case).
Photographer David Greene was kind enough to share a cool lighting technique he uses for fashion photography. Using your everyday florescence fixtures and bulbs David creates two strip lights. Watch the flick.
There strip lights are good enough to go with f/3.5 on100 ISO which is nice, and you don’t need to use florescence filters, cuz the bulbs (can you call florescence bulbs?) are daylight balanced.
Not so long ago, I got a mail from a reader and fellow DIYer Joris van den Heuvel. Joris referred me to his site where to my astonishment I found a ringlight heaven.
Now, I know that the photography web has been sizzling with ringlights ever since David Hobby posted his challenge for a DIY ringflash, but this guy is something else. Got some cool stuff I haven’t seen anywhere else.
Starting out with a “regular” one liner LED ring light (AKA Ring Light 1.0), Joris evolved to a two liner LED array and even a three liner. BUT WAIT!!! It gets better. CFFL tubes are yet another version of a ring flash, and…..
Joris’s latest work in progress is a fiber optics based ring light (just saying fiber optics flash makes me feel sophisticated and cool). I say – stay tuned for this one – as my friends’ say this is something completely different. You know what; check em all out here.
If you have a Technorati account and a spear minute, I’d love it if you add DIYP as a fav. You can use this link.
After Just Fab introduced her fabulous Ghetto Studio, which was a ghetto setup for the butterfly lighting (AKA Glamour Lighting; AKA Paramount Lighting) I felt like taking a shot with this kind of setup. (Pan intended).
It was my bad luck that the PVC store next door has ran out off all the PVC piping they usually hold (Yea, right! try – my wife will kill me if I build another PVC monster in the living room). I had no alternative but to go with another butterfly lighting solution. (The final deal, by the way, was “OK, OK, I will not build it, will you model for me? pleeeeease?”).[Read More…]
Reader Mike Coutinho saw the post about the studio compression pole, and this triggered something in his mind.
Same as with the DIY system, you can create a vertical pole from floor to ceiling and hang stuff on it (Flash, backdrop, diffuser panel).
The extra value of this solution is that it does not have to go vertical; the top pad can support various angles, so you can go diagonally wild. Another “feature” is that the Third Hand comes ready and there is not much DIY you need to assemble the pole.[Read More…]
Gary Fong has become a de-facto standard for speed light diffusion. The accessories made by Gary include the famous Lightsphere and lots of other small flash improvements.
Zond2 came up with a small and cheap flash application that mimics the lightsphere effect. The materials: A soda bottle, some foam cardboard and a starbucks latte cap.
I did not test this at home, but the concept looks really nice.[Read More…]
Just Fab has come up with a great PVC contraption she calls the Ghetto Studio. It’s a great and portable setup that takes great Glamuor shots.
I asked Just Fab to share her plans and setup and she kindly agreed. Below you will find the instructions to build such setup. Total cost is less then 40$.
We have showed a PVC setup before, but it was very big. This PVC setup can be used both indoor and outdoor. The bottom and top are tiltable, covered with Ripstop nylon. Bottom hasa car windshield screen as a reflector. The strobe goes behind the topscrim and bounces off the bottom to reflect up. Instant one light setupto do butterfly lighting. I did have to glue some of the piecestogether to keep it from falling over in the wind, but it’s modular andtears down. The bottom screen tilts about 1/16 the way down, the top istilts in the middle. I can reverse those is need be. You simply shootin between the two.
Here is an image taken with this setup. Look for shadows under the eyes. Found any? No!
Sweetness by Just Fab
The next following images show the materials you need to create this Ghetto Studio, as well as assembly needed.
Tom Barnett (pxlsnfr) has come up with some great High Speed Photography shots.
Tom uses very basic circuitry to trigger the flash on “hearing noise” and a bit more complex (though still pretty simple) circuit to avoid repeating flash triggering.
In fact the basic circuitry is just one SCR with plus and minus going to the flash and minus and gate going to an amplified mic. See pictures below.
From the number of crushed bulbs on Tom’s photostream, I’d recommend his services to any person that wants to be environment friendly and move to Energy-saving compact fluorescents (CFs).
What I like about Tom’s High Speed Photography, is that Tom controls this technique flawlessly, and can use it to photograph images with a great amount of creativity.