If you did not meet Nick Wheeler (Flickr Stream – a must) until now, you are in for a treat. Nick is what I call a Lean Mean Studio DIY Machine. Unlike the softbox for a hot shoe flash and the softbox made from a well…. a box, this softbox design by Nick is as close to a real life studio softbox design as a softbox can be. As always, Nick has done great job of documenting his work so all the DIYP community can benefit. Making this studio grade softbox takes some time and effort, but well worth the investment.
While this project is great, Nick calls it a prototype and plans on a follow up. Keep tuned to Nick’s Flickr stream – you’ll soon realize that you came for the DIY projects but stayed for the great photography. It all Nick from here on.
This is a DIY project I have had in mind for a while now. When I purchased my studio flash heads, they came with a couple of small softboxes. Although I prefer to use translucent umbrellas whenever I can (small, light, easy to transport), there are times when a softbox is a better solution. While I could use the studio head softboxes in some circumstances with my small strobes, there was no way of effectively holding the flash in place without a lot of jerry rigging. To this end, I wanted to design a softbox that would be light, reasonably strong and durable, adaptable (double diffuser, grid attachment, barn doors etc.) at a later date and have a quick and easy way to mount the flash.
While I achieved most of these goals, the finished softbox was a bit heavier than I would have liked and as is usually the case with these projects I figured out a number of modifications I would like to incorporate into my next attempt after it was finished. For now, I think I will label this as a ‘prototype’ and hopefully come up with something better for the mark II version.
Copy and paste this URL into your WordPress site to embed
Copy and paste this code into your site to embed