This post on a 2 cents macro studio got me thinking. Firstly because it is a great idea, it employs the same technique as the super simple light tent and the flash diffuser. Secondly it is cheap. So cheap in fact, that it really does only cost two cents. The thing that I was thinking is – “I want a BLT Sub”, and right after “This is great for small objects, what if I want to shoot something bigger? For this I came up with an improvement – The Origami Macro Studio. It is not as cheap – approximately 20 times more expensive – but for 40 cents, it is still a heck f a deal. And as the macro studio, it is cheap, takes 2 minutes to prepare, and very simple.[Read More…]
If you need a better way to hold the light you use while taking pictures with the DIY backdrop you just made, or you need a better way to control where light goes for keying out backgrounds in Photoshop, read through this tutorial on how to make a quick and durable (and highly configurable) lightstand out of one of those old, sort-of broken cheap tripods you have sitting in your closet. Even if it’s your main tripod, you should be able to modify it so you can swap it for a lightstand or standard tripod pretty easily.[Read More…]
This article will explain how to design and assemble bluescreens, greenscreens and backdrops for photos and video, as well as how to easily and inexpensively build a portable frame to support these backdrops out of PVC pipe or metal conduit. The ideas are similar to the ones that proposed by Brian Zimmerman, with a nice fresh view and clear explanations. (NOTE: Please be sure to read some of the extra notes at the bottom of this guide for optimal performance).
For amateur or hobbyist photographers and video producers, coming up with the money for a nice, $200 (and up!) backdrop and the expensive stands and hangers required to help support it isn’t very easy. Rather, they need a way to make a nice-looking background that is both good looking and easy to transport.[Read More…]
It is reported that Navy SEALS commonly use two condoms to seal firing assemblies for their underwater explosives, having thus coined the term: “Dual Waterproof Firing Assemblies”. This article is a tribute to their ingenuity, and it expands on the concept of the waterproof condom, in order to make a waterproof housing for my digital camera (and other consumer electronics).
(OK, OK, the original title was “Dual Waterproof Consumer Electronics – the condom housing”)[Read More…]
Rob Rohde-Szudy from duckworksmagazine has a great improvment for the Hunter Frerich’s super duper tripod. Yes! here is another creative way to save some $$$ on your photography equipment.
See this exploding grape picture? it was taken using a method called high-speed-photography. Yup, this is the same image type as those exploding balloons, squashed tomatoes and bullet shots. The idea is to capture a tiny moment in time, so tiny in fact, that you will not see it with your bar eyes. Trying to capture a flying bullet is not trivial, you can read about the general setup here.[Read More…]
How to take photos like the one you are seeing here. It’s a glass of Champaign, being shot with a BB gun. You can use this technique to take picture of exploding things like tomatoes, watter balloons, watermelons, or even you Canon camera as you smash it against a wall for not understanding the menus (Sorry, could not resist…) [Read More…]
This article will describe my home made sound trigger electronic kit.
I use this circuit kit to take high speed photos like the nice tomato splash shown here (more about high speed photography setups). This circuit is not complicated and the total cost is low so it is even suitable as your first electronics kit.[Read More…]
The measurements in the below table help to illustrate the amount of time that the flash is emitting light in each of its various power setting. This time is crucial when taking high speed photos.
Measurements were done with a Photo-diode, oscilloscope set to 50ohm.
|1/1 Output power|
|1/2 Output power|
|1/4 Output power|
|1/8 Output power|
|1/16 Output power|
|1/32 Output power|
|1/64 Output power|
|1/128 Output power|
contributed by Karsten Stroemvig (aka Lullaby)
This is a very simple diagram and instructions for building a shutter release cable for a canon DSLR.
Cable release is that thingamajig you use when you want to activate your camera, but you do not want to touch it. Why would you want t do this? I can think of two reasons: 1 – you do not want to move the camera by pressing the shutter release button. And 2 – you need to stand away from the camera. Compared with Cannon’s RS60 E3 this is a real nice deal.[Read More…]