DIYPhotography.net

I said is a few times before. Army surplus stores are a great place for photographer to hang out at and find some nice finds. I think that there is a strong connection between the needs of a soldier and the needs of a photographer.

One particular point where needs converge, is carrying equipment. It is only reasonable that both will need systems that will help them carry dedicated equipment. The soldier needs to carry riffle parts, bullets, field accessories; The photographer needs to carry lenses, small strobes, memory cards and so on.

Click to continue ›

UPDATE: Illustrations included.

There are several ways to wear your camera strap, you can wear it on your neck in what I'd love to call "The Lunchbox Carry"; you can wear it on your shoulder in a "Lazyman Hang" or you can wear it across your body, like soldiers are wearing their weapons in a "Weapon Cross". Which one is your favorite? 

Now, each of these hangs can be rated on three factors:

• How fast does it take you to bring the camera into a nice shooting position?
• How comfortable is it?
• How safe is it to your camera?

Click to continue ›

This is another fun project from the factory of reader Jerry Hamby.

It is a reflector holder from a $9.99 tripod, a 3ft long piece of PVC pipe, an elbow to fit, and a small clamp. (The Tripod is 9.99$ on July 26th on Amazon, but I bet similar tripods are always on sale somewhere). Like the previous project from Jerry, the Green Bean Hair Light, it's a short and fun project, and you don't have to make it in whole, if you like the idea, you can expand it to things other the tripods...

Click to continue ›

If you are mounting your lights indoors you are safe, but what if you are outside in the blowing wind?

This is not the first time that two shooting hobbies meet. Last time I talked about weapons photography cases and rifle camera straps. This time Christian Hedegaard has a great idea to prevent your light stand from blowing in the wind. The materials? Right, from the gunshop. Here is Christian's story:

Click to continue ›

What do you get when you cross a Nine Cents Tripod with a Pocket Foldable Tripod? A DIY Gorilla Pod.

Reader Alan Muller came up with a great way to combine the two tripods into a new even-better-then-each-of-the-originals tripod, which is very similar to the well known Gorilla Pod.

On his example Alan uses a bottle flash holder, but this Gorilla pod will firmly hold a medium sized point and shoot.

Alan used number 10 wired to make the legs: twisted and then folded and twisted again. This gives the Tripod a firm set of legs.

The wired can then be wrapped with shrink-wrap (fancy) or electrical tape (Ghetto).

At the base of the bottle, Alan used an eye bolt instead of a cap nut (or machine screw) to allow the attachment of a safety line or bungee etc.

Another bolt of ingenuity (pan intended :) was to use washers to separate the tripod's legs. Those give it stability and make some order in that messy area.

Click to continue ›

This is a guest post by Ken Stewart, a real DIY pioneer. Having recently gotten into macro photography with a set of Raynox close-up lenses, I found myself wanting a macro focusing rail so I could smoothly and precisely vary the distance between my camera and the subject to get the focus right. A quick check of the web showed me that the cheapest Manfrotto slide I could find was $80 (plus tax and shipping, of course), but I figured I could do better with a little ingenuity, and an obligatory trip to Home Depot.

Click to continue ›

Reader Mike Coutinho saw the post about the studio compression pole, and this triggered something in his mind.

Mike told me about the Third Hand system (via toolmonger) which provides a very similar functionality.

Same as with the DIY system, you can create a vertical pole from floor to ceiling and hang stuff on it (Flash, backdrop, diffuser panel).

The extra value of this solution is that it does not have to go vertical; the top pad can support various angles, so you can go diagonally wild. Another "feature" is that the Third Hand comes ready and there is not much DIY you need to assemble the pole. Click to continue ›

usefulguy from DIYPhotography's Instructables group has posted a pretty neat Instructable explaining how to make a photo studio compression pole. It kinda reminds me of the hardware store light-backdrop stand, but it is even easier to use.

The good news is the cost: all the parts cost 9.43 at Home Depot. Real cheap for an all purpose studio stand.

To make a good thing better, he even has a video showing how one can use the pole in a studio:

Click to continue ›

As part of the light stand frenzy that's been going on here, I thought I'd introduce you to another way of placing a flash on location in a cheap and fast way. I learned this hack from David hobby at strobist and been grateful ever since. The idea is quite simple. It is similar to the one displayed in the Spatula article (gotta love this word - spatula...), only instead of using a spatula, I am using clamps. And hey! It was from the same trip to the hardware store. Click to continue ›

One of the challenging lighting setups that I have encountered deals with setting up a lighting environment in small spaces. Spaces like working dens, children rooms and offices. Those places are sometimes dark and not well lit. The solution for this problem is simple - use flashes. One or two hot shoe flashes can easily give you the light you need. For creativity sake, you would like to take those flashes off camera like one of my favorite sites suggests. So where will you place those flashes? Obviously, you can not use a lighting stand - there is hardly any place for you, let alone your big lighting stands.

So what would you have in abundance in a working den? Let's see.... If you've ever been in a lawyer office, you can't escape the answer - they have books. Shelves and shelves of books. Do they actually read them? I don't know. Can you, as a photographer use them? Heck yes!

In the following article, I will show you how to create a simple, fast to build, cool looking lighting stand from a plaster spatula and some books.

The first thing you will need is a plaster spatula, those come in really cheap. You can get a metal one or a plastic on, and there is no need to buy the high end spatulas, just buy the crummiest, cheapest, made in Taiwan most suitable spatula you can find.

You will also need an umbrella holder (AKA swivel). Or if you don't have one a long 1/4" bolt and nut. In general 1/4" bolts are something usful to have around the house. Click to continue ›