- Tips On Building Lighting And Shooting On A DIY Green Screen
... green gabardine fabric from Jo-Ann + a 1" PVC pipe and some A clamps form Home Depot. While the screen can be ... ties it up to two spare microphone polls. (If you love PVC, you can build this kit too) About lighting a Green Screen The ...
Story - udijw - 2013-03-01 16:29 - 6 comments
- 43 Photography Hacks, Mods And DIY Projects
... A+! (Backdrops, Lighting, Lights, Lights, Modifiers, PVC Studio, Support Systems, Tips, Home Studio, Home Studio & Lighting) ...
Story - udijw - 2010-03-18 11:38 - 14 comments
- Light Painting And EL Wire Secrets Revealed
... “arms” are very secure and don’t wobble. B: PVC pipe wrapped with black electrical tape. The EL wire was wrapped around the ...
Story - udijw - 2013-03-17 22:55 - 0 comments
- Build A PVC Camera Shoulder Rig
... video to show how you can make an HDSLR shoulder rig from PVC pipes. For the most basic configuration all you'd need is a bunch of PVC pipes and fitting and a conduit box. If you want a little bit extra ...
Story - udijw - 2011-03-01 09:15 - 6 comments
- Studio Lighting - Soft Panel Frame Designed for Hotlight
A stand made of 3/4" PVC to hold a diffusion panel made of ripstop nylon that slides up and down and ... Total cost, including 500W light stand, nylon and PVC parts is about $50. I also got a similar quartz-halogen 250W clip-on light ... along the shorter 3' ends to create a loop into which the PVC pipe slides at top and bottom. Measure carefully for a snug fit or cut side ...
Page - udijw - 2011-07-29 12:22 - 31 comments
- Studio Lighting - DIY Cheap Soft Light Panel Frame Designed for Flash (or hotlight)
... can always add sections to the main vertical piece using PVC couplers to achieve the desired height. Currently, I use two sections of ... the top horizontal hanger support (shown here with 1" PVC) with 1-1/2" PVC like the rest of the main frame, to make it a bit more ...
Page - udijw - 2010-03-21 12:16 - 24 comments
- Studio @ Home - Full Scale Backdrops & Backgrounds
... Next thing you'll need is a pipe. I tend to go with PVC pipes for this, but any pipe will do, as long as it is longer than the roll ... it can be folded and easily stored I use PVC and two lightstands I use two lightstands (which I bought for $60 on ...
Story - udijw - 2010-03-08 09:23 - 15 comments
- DIY Ghetto-Fab Portable Backdrop Stand
... projects I have seen. Riding on the PVC wave , Ed created a three section foldable backdrop stand. The genius ... than $40 Parts Needed 2- 8ft sections of 1"PVC 2- 1" PVC "T" Fitting 1- Levolor solid 1"x6' curtain bar from the window ...
Story - udijw - 2010-03-08 10:05 - 12 comments
- Attach Your Camera To.... Anything
... Zeke - This is my way to pay off for all those huge PVC constructions that readers get into the garage. by taking a bit of the ...
Story - udijw - 2010-03-08 09:29 - 17 comments
- Studio Lighting - Cheap DIY Homemade Reflector Stand
... Introduction This reflector panel holder made of 3/4" PVC pipe is handy if you have a spare tripod to use. The tripod provides a ... (31 x 38"). It may also be possible to build a stand from PVC. Reflector Stand Instructions Some joints are left ...
Page - udijw - 2010-03-21 12:14 - 29 comments