- How To Build A PVC DIY Photo Light Box
It is no secret that we love PVC pipes turned into studio gear. we teamed up with pvcfittingsonline to ... guide. Materials 15ft.of ½” PVC pipe 4 x ½” CPVC / PVC 3-Way fittings 1 White bed sheet (twin is fine) Heat bond tape ...
Story - Guest Contributor - 2013-10-23 20:40 - 0 comments
- PVC Backdrop/Light Stand
I love nothing better than a good PVC construction. This is why I was so happy when David Turman sent in this great PVC stand. As any stand it can double as a light stand or a backdrop stand. You ...
Story - udijw - 2010-03-08 10:05 - 24 comments
- How To Build A Slick Strobe Power Pack
... 2,1mm socket | 2,39 € Switch on/off | 1,90 € PVC rigid foam board 3mm black | ~ 5 € Fuse & fuse holder | 3 € ... The Case Measure the bag, switch and LEDs and cut the PVC board to fit. But the board and fit the switch and LEDs into the board. ...
Story - Guest Contributor - 2013-12-02 10:05 - 0 comments
- How To Build A DIY PVC C Stand
... at face level and so on). We have featured a few PVC light stands before but this is the first C-stand that we have ... respect to sturdiness, I am not sure that C-stands and PVC make a good pair, but this design by Alex Sokolsky was kinda unique and ...
Story - udijw - 2013-02-11 14:30 - 6 comments
- Cheap DIY (Homemade) Muslin Photography Background
... to spend $120 to $170 for a background stand get out the PVC and do it for 5 bucks! Run down to your local home supply store and pick up a 10 foot length of 3/4 inch PVC pipe. Get 2 90 degree connectors. Get 2 3/4 inch straight connectors. ...
Page - udijw - 2012-08-09 12:57 - 212 comments
- How To Shoot Ethereal 360 Camera Moves With a GoPro (DIY / Commercial)
... 2" swivel caster post to gain a frictionless center, a PVC pipe (our favorite DIY material) and a Handlebar Seatpost Mount for the ...
Story - udijw - 2013-10-31 14:47 - 0 comments
- How To Build A PVC Full Body Background Stand For 20€
... It has been a long time since we had a good solid studio PVC build (pun intended), so I was quite thrilled when David Schöppe sent in this full body backdrop stand made from PVC I’ve read about quite a few photographers using a 35€ IKEA ...
Story - udijw - 2013-04-18 17:11 - 0 comments
- A Light Wall Of Light From Bed Sheets And PVC
... to assemble the frame: I used 1? thin walled PVC pipe because it was handy – it was left over from another project. Larger ... of 34? long pipe 4 pieces of 36? long pipe 8 PVC 90-degree elbows 16 PVC Tees The measurements above were arrived ...
Story - udijw - 2011-10-25 20:02 - 23 comments
- DIY DSLR PVC Shoulder Rig
... to Get a bit DIYish this weekend and came up with a PVC DIY shoulder rig. It's a bit different from the designs they are ... the entire build is about 10$. Basically it's a bunch of PVC parts, a 1/4-20 screw and some optional electrical tape. It looks pretty ...
Story - udijw - 2012-12-10 18:58 - 8 comments
- How To Build A PVC Soft Screen
If you need a big, nice soft light source one of the cheaper options is to use a small light combined with a diffusion panel, which is basically just a huge sheet of fabric. The question is how to support this mess of fabric that only wants to sit cru ...
Story - udijw - 2013-06-14 09:02 - 0 comments