In The following article, Brian will demonstrate how to build a DIY backdrop stand. The stand, along with matching backdrop will help to create a controlled environment, with good subject/background separation. The cost is very low, just some PVC pipes, muslin and two really good hands. Oh, and a wife to agree to place this in the leaving room. Read more ›

Here Brian shows how to build a homemade cheap flash bouncer. The flash bouncer can be used to increase the size of a hot-shoe flash. The bouncer is great and very easy to build. An alternative to the bouncer is the home made softbox. Another option for building this homemade flash bouncer is to use polypropylene sheet, it is sterdier then cardboard. Enjoy your read, Udi. Read more ›

In the following article Brian Zimmerman will demostrare how to make a small, home made flash diffuser. you might also want to check out the diy mini flash bouncer guide or the diy flash softbox guide as alternate solutions. Read more ›

Soft Panel Introduction 

A stand made of 3/4" PVC to hold a diffusion panel made of ripstop nylon that slides up and down and tilts. Sliding joint is made of a "Slip-Tee" as described in the Tinker Tubes document at "http://www.software-cinema.com/tinkertubes/tt-book.pdf". Total cost, including 500W light stand, nylon and PVC parts is about $50. I also got a similar quartz-halogen 250W clip-on light for about $15 that I hung above to add some highlights to the hair. Read more ›

Soft light Panel Introduction

In the following article, Brian Zimmerman will demonstrate the construction of a soft light panel frame. As Brian will illustrate, the soft light panel frame can be used to reduce the harshness of light, and to crate soft eye pleasing picture. THe soft light panel can be used to take portrait pictures, or still life picture. The construction is not easy, but very rewarding.
Enjoy your build. Read more ›

All the articles in this section were contributed by Brian L. Zimmerman. Brian has done a great deal of home studio constructions and was very kind to share his knowladge. Brian has built a homemade flash diffuser, a homemade flash bouncer, homemade backgroung stands, and other soft light panels. (I bring the information here in first person form, as a direct quote from Brian).
you can see more of his work at BLZphotos.com. Read more ›